Key Benefits

• XTender-only precision fit: Slides into the XTender T-track with T-bolts for fast install, rigid mounting, and repeatable alignment.
• Blade capture for safer pattern cuts: On the table saw, the blade runs captured beneath the fence and behind the workpiece for controlled duplication.
• Clear acrylic visibility: Transparent guide plate keeps the cut line visible while supporting the workpiece.
• Adjustable height control: Simple vertical slot adjustment; set about 1/16″ above your stock for smooth feed.
• Built-in stop capability: Position it in front of the blade for repeatable crosscuts while keeping material clear of the rip fence.
• Short-fence advantage: Fence stops at the blade (sliding-saw style) to help reduce binding on short parts.
• Bandsaw-optimized divot: Acrylic plate includes a relief divot to correctly position the bandsaw blade for guided cutting.
• Adjustable guide follower for curves: Follower installs under the fence to help prevent drifting into layout lines in heavy-grain material.Dual compatibility: 1/4″ and 3/8″ blade support.
• Rough-out + router workflow: Leave 1/64″–1/32″ on the bandsaw, then clean up fast at the router table with reduced tear-out and burning.
• On-tool follower storage + factory rigidity: Follower stores on the device; precision brackets deliver repeatable results without jig building.

Compatibility

Works exclusively with the Bow XTender Fence System.
Not compatible with standard rip fences or third-party fence systems.

What’s Included

• Two precision L-brackets
• Clear acrylic L-Fence guide plate (with bandsaw relief divot)
• Adjustable dual-position guide follower (1/4″ & 3/8″ blade support)
• Two T-bolts
• Three Bow knobs
• Four small machine screws
• One large machine screw
• All required XTender mounting hardware

Ideal Applications

• Template and pattern duplication on the table saw
• Tapered edge and face cuts
• Repetitive short crosscuts using stop positioning
• Safe duplication of small angled parts (use a miter gauge for angle control)
• Bandsaw rough-out prior to routing (leave 1/64″–1/32″)
• Controlled radius and curved cuts with the follower
• Cleaner results in materials prone to burning or tear-out