|
 |
Home > Retail
Showroom >> Powermatic Industrial
|
Since 1921,
Powermatic® machinery has been the symbol of quality,
durability, and innovation in the woodworking industry. Our
innovation and quality commitments extend to home shop hobbyists,
small shop professionals, and large shop industrial woodworkers.
These
Powermatic machines are built tough to satisfy the
daily demands of industrial production, but scaled
to fit in a small shop as well. |
|
 |
|
The
Model VSP126 Vertical Panel Saw features a heavy duty welded
one piece steel frame. Saw assembly supported by eleven bearings
for vertical travel. Powerful 4.8 HP motor with electric brake.
Automatic grid shifting frame.
|
|
 |
|
VSP126
Vertical Panel Saw |
Features
the 50" Accu-Fence System. Precision ground cast iron
table is finely polished to a mirror finish. The left tilting
blade prevents the binding of stock between the blade and fence
that substantially reduces the possibility of kickback.
|
|
 |
72A
Tablesaw 14" Tilting Arbor |
The left tilting
blade also aids in making clean mitre cuts as the tear-out
will be on the bottom side of the work piece. The wide stanced,
heavy-duty one piece trunnion has a "C" Flange mount
which relieves the weight at the saw arm pivot shaft and promotes
easier raising and tilting of the saw blade. T-slot for standard
miter gauge. Exclusive 3VX belt drive distributes torque more
efficiently and generates less heat while operating virtually
vibration-free. Also available with 10" Tilting Arbor-Model
66. |
The Model COS18 18"Cut Off Saw has an 18" blade,
10 HP motor, 70 cycles a minute. Contains full coverage guards
and comes in either left or right hand models. |
|
|
Powermatic
COS18 18" Cut Off Saw |
The Model SLR12 12" Straight Line Rip Saw is contains
full cast iron construction, 15 HP main motor, five stock hold-downs,
dual anti-kickback devices, 18" x 3-3/8" cutting
capacity, auto chain oiler with low level shut-off. Guaranteed
8 ft. glue line. |
|
 |
SLR12
12" Straight Line Rip Saw |
The Model 2013 20" Bandsaw features powerful totally enclosed,
fan cooled motors to keep out dust for a longer life and maximum
performance. Tables tilt 45° to the right and 15° to
the left and come standard with a T-slotted mitre gauge. The
extra wide flange along with a heavy-duty trunnion assembly
provide extra durability while eliminating any "flexing"
of the table. |
|
 |
Powermatic
2013 20" Bandsaw |
The Model WP2412 24" Planer features a segmented infeed
roller with sectional chip breaker, variable speed feed rate
from 16 to 72 FPM, Tersa-type cutterhead with reversible knives,
adjustable bed rollers, 2 speed table raise and lower motor,
double drive chains and sprockets with double bearings on cutterhead,
and infeed and outfeed rollers, and digital readout. Heavy
plate steel construction at 2310 lbs.
|
|
 |
WP2412
24" Planer |
The Model 201 22" Planer features segmented infeed roller
with sectional chip breaker, adjustable bed rollers. All cast
iron construction 1,350 lbs.
|
|
 |
201
22" Planer |
The Model
209 20" Planer features a 5 HP Motor, 20" planning
capacity. Fully enclosed base cabinet with integrated casters.
Big 55-1/2" x 20" cast iron table and extension table
supported by four columns. Four feed speeds: 16-20 FPM, 24-31
FPM. Feed rollers and cutterhead supported by full cast iron
head assembly.
|
 |
209
20" Planer |
The Model PJ1696 16" Jointer features a 7-1/2HP 3 PH motor.
Center-mounted cast iron fence assembly. Helical cutterhead
with 2-sided insert tooling. Positive fence stops at 90°
& 45°.
|
|
 |
PJ1696
16" Jointer |
The Model 1285 12" Jointer features an adjustable infeed
and outfeed table with locking knob. Built in rabbeting edge
with 3/4" capacity. Table "lips" on both sides
of cutterhead aid in noise reduction. Parallelogram construction.
|
|
 |
1285
12" Jointer |
The Model 60B 8" Jointer is available with 2 HP single
phase and 3 HP three phase motors. Center-mounted cast iron
face assembly. Large 8" x 73" table surface. Positive
stops at 45° and 90° in and out.
|
|
 |
60B
8" Jointer |
The Model TS29 Sliding Table Tilting Spindle Shaper features
a sliding table with mitre head, hold down and fence. Fully
adjustable fence with dual digital readout. Spindle tilts negative
5 to positive 45°.
|
|
 |
TS29
Sliding Table Tilting
Spindle Shaper |
The Model 29 Shaper features spindle tilts 45° forward
and 5° backward for bevel shaping. Three standard table
inserts, smaller insert has a guide shoulder for copy work.
Entire hold-down assembly flips out of the way for spindle
changes. Two hold-downs and cutterhead shield are standard
equipment.
|
|
 |
29
Shaper |
The Model 27S Shaper features a spindle assembly that is mounted
to the table bottom. Two-speed reversible spindle. Work piece
hold-downs are fully adjustable. Spindle is mounted in heavy-duty
precision ball bearings. Removable inserts make the use of
any cutter safer via undercutting (raised panel cuts). Precision
fine-tune adjustment is easily accomplished and locked into
position with "quick-lock" handles. Extra large,
30" x 40" heavy cast iron table. Available with or
without a T-slot for miter gauge.
|
|
 |
27S
Shaper |
The Model 719A Hollow Chisel Mortiser features heavy cast iron
construction. Rack and pinion head raising and lowering system.
Hand wheels control the linear and cross movements of the table.
Hinged doors allow access to chuck for easy bit changes.
|
|
 |
719A
Hollow Chisel Mortiser |
The Model OES9138 Oscillating Edge Sander features a 3HP motor
with 9" x 138-3/4" abrasive belt. 9" x 48"
platen with graphite pad. Large 11-3/4" x 48" front
worktable with 8 vertical travel tilts from negative 5 to positive
45° and includes miter head for angle work.
|
|
 |
OES9138
Oscillating
Edge Sander |
The Model 75 - 1,900 CFM is strong enough to use with planers,
wide belt sanders, tablesaws and most other woodworking machines.
Cloth upper collection bags are made of a 5 micron material
which aids in the filtration of all but the finest dust particles.
Available in 3 HP, 1 Phase or 3 HP, 3 Phase. Multiple connection
port capability allows for use as a central dust collection
system for the entire woodworking shop.
|
 |
75
Dust Collector |
The Model 1632 Wide Belt Sander 16" Open End is available
with or without digital readout. Automatic pneumatic conveyor
belt tracking keeps belts centered. Features a combination
head that promotes a more consistent finish.
|
|
 |
1632
Wide Belt Sander 16"
Open End |
The Model DDS-225 Dual Drum Sander features a 5 HP motor for
plenty of power. Independently adjustable rear drum. Dual steel
drums with hard durameter rubber coating. Heavy cast iron table.
Two speed gearbox and ¼ HP feed motor with reverse.
Heavy-duty poly conveyor belt. Four solid jackscrews with chain
drive timing. Dust collection baffles built into hood.
|
|
 |
DDS-225
Dual Drum Sander |
The Model 3520A 20" Wood Lathe features Two-step, 10 Groove
Poly-V Belt Drive. Headstock and tailstock are 1/2" thick
cast iron. Headstock and tailstock have positive cam action
locking devices. Headstock is adjustable (transforms the lathe
from a long bed lathe to a short bed lathe with ease).
|
|
 |
3520A
20" Wood Lathe |
|
 |
|
|